Ozbuild VJ Sheeting is:

• Off-stud joining- due to tongue and groove joining method

• No plastering - you can paint it immediately!

• Impact Resistant - an extremely strong and durable alternative to other interior wall and ceiling linings.

• Flexible - bends and curves to the shape of your ceilings or walls.

• Moisture Resistant Available in a moisture resistant (MR) grade which is suitable for use in bathrooms, laundries and kitchens (excluding wet areas)

• Easy to Use cuts and machines beautifully

• Environmentally Sustainable We use only material sourced from sustainable and renewable Australian timber plantations.

Technical specifications:

• VJ Pattern Distance: 100mm
• Sheet Joining Pattern: Tongue and Groove
• Available Lengths: 2400 / 2700 / 3000 / 3300 / 3600 / 4200 / 5400mm.
• Width: 1208mm.
• Thickness: 9mm.

Storage and Handling:

In order to keep your Ozbuild VJ Sheeting in good order and condition we recommend that they are stored in an area protected from the sun, rain and wind.

All packs should be evenly supported with bearers spaced underneath the packs. Ideally place the first bearer within 50mm of the end and then place a bearer every 600mm from then on, leaving the last bearer 50mm from the other end. If packs are to be stacked on top of each other then ensure that all supports are vertically aligned.

Keep work areas as clean as possible and store sheets with the VJ facing down so that they cannot be damaged or walked on.