|
Stock lengths for this size is 9m, 10.5m, 12m, 13.5, 15, 16.5, 18mHot Rolled Structural Steel sections produced by OneSteel are manufactured in accordance with the requirements of Australian/New Zealand Standard AS/NZS 3679.1 Structural steel Hot-rolled bars and sections. Grades other than shown below may also be available depending upon section and quantity requirements. For additional information please contact a OneSteel Office near you. For information on section & tensile properties and chemical composition for Channels select the appropriate link from the right hand menu. For information on manufacturing tolerances please refer to AS/NZS 3679.1. Additional Info
AS Standard: AS/NZS 3679.1
Grade: 300PLUS, AS/NZS 3679.1-350
Size Range: 75 PFC to 380 PFC
HOW TO MAKE AN ENQUIRY FOR THIS PRODUCT Indicate all lengths and quantities of each that you need in the box as follows: 2/3000 6/3600 for example Add up the total lineal metres of all lengths and place this in the Qty box = 27.6 as per the example above Hit the "Add to cart" button If supplied in lengths other than stock lengths, a cutting and waste charge will be included in to the lin m rate
|
